Discover How To Fix Xbox 360 Red Ring Of Death Forever – 2 Step Guide Success Methods Here!

Fix Xbox 360 Red Ring Of Death - Start Playing Yours Again

Have you become frustrated of late because you need to fix Xbox 360 red ring of death instead of enjoying your favourite games? Long hours of play for months on end is a major cause of this error, but some people believe this is a combination of both long play and a poor design issue of the console itself. Because of this design fault, the Xbox 360 has ventilation and heat issues which is probably why you are seeking some sure-fire ways to fix these errors permanently today.

Step 1 method for fixing Xbox 360 red ring of death.

Go to your console and look at the back-end to see if any cables are loose. These loose connections can cause these errors to show if they are not inserted properly. After you have done this step, simply plug the console back into its power source and you should be good to go. If this has not corrected the problem then you are required to read the next step because it will require a more technical required fix because it could be a overheating issue error. Loose or burnout damage to your consoles components will require repair and these are easy to do if you have the right knowledge and guidance.

Step 2 on how to permanently fix Xbox 360 red ring.

You can ask Microsoft to come to your rescue by paying $140 and then waiting for up to 6-8 weeks before seeing a refurbished Xbox 360 console. Please take note that there have been reports of the dreaded Xbox ring of death returning after people have received a refurbished console. This is simply because the design fault within the inner hardware device has not been resolved and this is where you can discover how to fix this error yourself here today in just 1-2 hours.

You will be required to open up your console and take away the hard drive, DVD drive along with the fan. Then proceed by locating the motherboard, dis-connect and turn over onto its back. You need to locate both the GPU & CPU processors and you will find these after gently loosening and lifting the heat-sink. Clean both components until looking like brand new processors and then proceed by carefully applying arctic thermal paste onto just the GPU. Leave this compound to set for 10-15 minutes then place 4 nylon washers onto the screws that hold down the heat-sink and gently screw back down but do not screw down too tightly.

Finish off by putting everything back together and you can begin to enjoy playing your favourite console games again.

So, let us re-cap on what we have discussed by shortening these steps down for you. You could pay Microsoft $140 to have your Xbox 360 3 red lights fixed and then wait 6-8 weeks before you will even see it again. Or just Fix Xbox 360 red ring of death yourself in 1-2 hours and do it in a much cheaper way (AT HOME) by Clicking Here.

Article Source: http://EzineArticles.com/?expert=John_Reed_Smith

Do You Want To Fix Xbox 360 Red Ring Of Death For Good? – Cheap, Fast Solutions Right Here

If you are a massive fan of the Xbox 360 then I am sure you have heard of other Xbox 360 owners trying to look for ways to fix Xbox 360 red ring of death. Today you are going to find some cheap, fast but effective and permanent solutions to solving this error once and for all.

First things first, what is it that actually causes the red ring of death to appear.

Well first and foremost you need to know that heat is the biggest problem for the Xbox 360 console. I am sure you enjoy playing on your console for hours on end but as you do this heat is slowly damaging the internal hardware of your system. This combined with ventilation and heat-sink flaws can cause movement within the motherboard and once this begins to happen, your Xbox 360 will run the risk of having its solder connections breaking within. Once these major components come loose you will begin to have freezing issues along with seeing the Xbox 360 red ring of death.

Does Microsoft offer a warranty to cover you from this error.

A short and simple answer is yes. You will be covered for 3 years by this issue but there are some things you may want to consider before you rush into sending your console back to Microsoft to be repaired.

Firstly, you have to know that Microsoft will not fix Xbox 360 red ring and will replace your broken console with a refurbished one. Because of this you run the risk of losing all saved data you have stored onto your hard drive. If you decide to open the Xbox 360 and take the hard drive out, you run the risk of making the warranty becoming void because Microsoft will not accept any devices that have been previously opened. Secondly, there have been reports of the Xbox ring of death error occurring soon after people have received their refurbished consoles. Lastly, if you are not covered by the warranty then you will have to pay Microsoft a hefty amount of money to have this error fixed and then wait for up to 6-8 weeks before seeing it again.

So what are the alternatives to these methods then.

A quick and fast solution is to use the famous towel trick. This method involves wrapping your console up in a towel whilst it is still in power mode, thus melting the broken solder connections back into place. This method will only work for a short period of time and I do not recommend this method to any Xbox 360 owner.

A better and more permanent solution is to fix the dreaded red ring of death yourself at home. Anyone can do this fix no matter what their technical capabilities are. It is a case of taking away the outer plastic casing, removing the hard drive, fan and DVD locating the heat-sinks, GPU & CPU then applying some arctic thermal paste over the GPU after cleaning them. Finally, you will place 4 nylon washers onto the screws that connect the heat-sinks to the motherboard so there is room for breathing within the internal hardware system.

Applying this method should only take you around 1-2 hours to complete if you use step by step video tutorials. Paying Microsoft $140 + and having to wait 6-8 weeks is another option for you. Or just Fix Xbox 360 red ring of death yourself in 1-2 hours and do it in a much cheaper way (AT HOME) by Clicking Here.

Article Source: http://EzineArticles.com/?expert=John_Reed_Smith

Your Fast Fix Xbox 360 Red Ring Of Death Guide – How To Avoid Waiting For Weeks & Losing $140 Solutions!

 

Most Xbox 360 owners believe it is an easy task to find guides to fix Xbox 360 red ring of death errors. What they do not practice is what can prevent your console from becoming vulnerable to this red ring of death threat in the first place. Better ventilation, good use practice and general care and maintenance are all required to make sure your Xbox 360 is going to last for a lot longer than usual. As soon as people see the Xbox red rings they assume that the first method they see is going to rescue their console from this unfortunate error.

Why are you and so many other console owners experiencing this red light error.

Also known as RRoD, this flaw is caused by several defects from within the inner sections of the console itself. From overheating issues causing damage to major components or even movement within the motherboard which is caused by this heat, you and so many other Xbox 360 gamers are vulnerable to these general causes. Even power point surges have been known to happen because of these design flaws which can then mean you will see 1, 2, 3, or even 4 flashing red lights.

You can try to fix Xbox 360 red ring by checking the hard disk which is found close to the DVD drive and fan within the console. First of all you need to ensure that the console is lay on a flat, level surface and that good air flow can get to all areas of the console. After doing this you can see if it works, if not try another method of replacing the old hard drive with a new one. If any of these results work then you are a happy gamer once again, if not then you will have to find out what else is causing the Xbox 360 red ring of death.

Testing your power supply is a good method to see if this is causing the error. First and foremost, you will need to check that all cable connections are inserted well enough because so many other console have reported the red ring error and could have been solved by simply checking the connections. All Xbox 360 consoles come with a power surge device that can be tested by being removed and plugging into your power point without it to see if this needs to be replaced. Finally, try other power outlet points around the home and try more than one to see if it is not the power point itself that could be causing the 3 red lights to flash.

These consoles are very addictive and in most cases it is down to long hours of play that causes heat issues within the Xbox 360. People will leave the power switched on even whilst they are not playing on their console meaning that there is not enough sufficient cooling time.

These methods are very easy and effective for fixing the Xbox 360 red rings of death but there are more methods you can try if these do not work for you. Paying Microsoft $140 + and having to wait 6-8 weeks is another option for you. Or just Fix Xbox 360 red ring of death yourself in 1-2 hours and do it in a much cheaper way (AT HOME) by Clicking Here.

Article Source: http://EzineArticles.com/?expert=John_Reed_Smith

Easily Fix Xbox 360 Red Ring Of Death Permanently – No Technical Skills Required – Fix in Minutes

Fix Xbox 360 3 Red Lights Error - Black Xbox 360 Demo Pic.

Are you fed up with constant reminders from your console stating that you need to fix Xbox 360 red ring of death urgently? You have to be wise when choosing a method you wish to use in order to fix your console, because there are some techniques that will actually cause more harm than good. Do not be fooled by the famous towel and hairdryer tricks as it is understandable that you and many other Xbox 360 owners can get frustrated and desperate enough to try almost anything that has a good success rate. Using the towel and hairdryer methods do work but only temporary and you are risking further permanent damage as a result.

Many people believe that their consoles require new parts as a result of Xbox 360 3 red lights, but this simply is not the case. Nearly 95% of consoles only need to be fixed by using some simple and effective methods and will not require you to buy any new parts, which can save you spending $140 if you were to send it to Microsoft. Plus you will not have to wait for up to 6-8 weeks before seeing your console again and most fixes of Xbox ring of death can be done in less than one hour.

What is causing so many people to be frustrated by these red rings of death.

There is only one real reason as to why 500,000 Xbox 360 owners want to fix Xbox 360 red ring. Constant heat and movement over months of play cause the motherboard to vibrate. This can lead to cracking of solder joints which connect major components to the motherboard. These joints are more vulnerable to heat because Microsoft decided to use lead free solder because of environmental factors.

There are video and audio professional Xbox 360 guides out there that will show you exactly how to fix any red light error and here is one example from the Xbox 360 guide itself.

1. Start by removing the faceplate along with all outer plastic shell.

2. Remove the DVD drive, fans and disk drives then locate and remove the motherboard.

3. Next you need to turn over the motherboard and dis-connect the x-clamps located on the back of it. Place 2 nylon washers onto the screws that connect the x-clamps to the motherboard. Screw back down but not too tight as this method is supposed to stop the motherboard from vibrating too much.

4. This time you need to locate and lift the heat-sink. Place 2 nylon washers over the holes place the heat-sink back down and finally add 2 more nylon washers to each screw before re-tightening. This will help the heat-sinks to absorb more heat which will keep the motherboard cool.

5. Clean the GPU & CPU with rubbing alcohol substance until satisfied they are clean again.

6. Next you need to apply some arctic silver compound over both GPU & CPU. Heat them both by using a heat gun for around 30-40 seconds then allow for cooling. Leave to set for up 20 minutes after this step.

7. Finish by re-connecting the DVD, fan, disk drives and outer casing then switch the power back on after re-connecting the cables. You should see your console cycle through all 4 red light errors then switch off after 10-15 minutes.

8. Switch the power back on again and you should see the green lights instead of red and can begin enjoying playing again.

All in all this method should only take around 60 minutes to complete and is a much better way of fixing the Xbox red rings than wrapping it up in a towel. Fixing the dreaded red rings yourself is very simple if you have technical skills and previous experience with fixing electronic devices. Paying Microsoft $140 + and having to wait 6-8 weeks is another option for you. Or just Fix Xbox 360 red ring of death yourself in 1-2 hours and do it in a much cheaper way (AT HOME) by Clicking Here.

Article Source: http://EzineArticles.com/?expert=John_Reed_Smith

Discover Your Quick Fix Xbox 360 Red Ring Of Death Tips Here – Fix Permanently in Just 1-2 Hours

Fix Xbox 360 Red Ring Of Death - Xbox 360 Official Logo

You are going to discover how to fix Xbox 360 red ring of death for good by using some sure fire success methods here today. How long has it been since you actually had the freedom of playing on your favourite console without having to worry about those dreaded Xbox red rings? On a positive note, you may not need new parts for your console because recent studies show that nearly 95% of consoles only need to be tweaked slightly. This can be in the form of a Xbox 360 repair guide to get your console up to full restoration.

Why do you have the Xbox ring of death in the first place.

Heat is a common factor with every electronic device, especially the Xbox 360. Smaller sized heat-sinks were made in order to create room for the consoles DVD drive. This meant that Microsoft created millions of consoles that had this common design flaw and have admitted that there could be a heat escape problem as a result. This is why you and so many other Xbox 360 owners are looking for ways to fix Xbox 360 red ring for good.

While you have been playing your favourite games, the motherboard and its components have been heating up due to long hours of play. Some people will leave their console switched on whilst doing other things which can be fatal as cooling time is a must for all Xbox 360 machines. Movement to your motherboard usually causes soldering joints to become loose and if the GPU is subject to this error then you will begin to see the Xbox 360 3 red lights.

What can you do to stop this overheating.

1. Take away all outer casing along with the faceplate.
2. Locate the motherboard and heat-sink then proceed by removing them also.
3. Place nylon washers between the screws that hold the heat-sinks to the motherboard. (This allows the heat-sinks to work more effectively plus will give the motherboard more breathing space).
4. Clean the GPU by using alcohol rubbing substance and then apply some arctic silver paste on top of it. (Allow to set for a few minutes before moving on to the next step.
5. Clean any dust or grime build up away from the motherboard.
6. Once happy with completion of these steps you can put everything back together.

These steps are very easy for any Xbox 360 owner to do and will fix red ring of death providing you follow every step correctly.

If you are a little nervous and do not want to take apart your console without any real visual guidance, then there are 2 more options you can try. You could pay Microsoft $140 to have your Xbox 360 3 red lights fixed and then wait 6-8 weeks before you will even see it again. Or just Fix Xbox 360 red ring of death yourself in 1-2 hours and do it in a much cheaper way (AT HOME) by following step by step video tutorials which will fix any Xbox 360 error permanently by Clicking Here.

Article Source: http://EzineArticles.com/?expert=John_Reed_Smith

3 Reasons Why Your Xbox 360 Has the Red Rings of Death – Easiest Way to Fix Xbox 360 Red Ring Of Death Here!

Fix Xbox 360 Red Ring Of Death - Xbox 360 Kinect Pic.

It has to be said that the Xbox 360 is a fantastic console. But it is sad that you are here today looking for ways to fix Xbox 360 red ring of death for good. It has a fantastic graphics processing unit which enables you to feel at one with the games you play. But unfortunately it is this GPU which can often become vulnerable due to extreme heat within the Xbox 360 console and therefore you begin to see the Xbox ring of death on the front of your console.

You will see the Xbox 360 3 red lights displayed on the front of your Xbox glowing red around the power button. the 3 main causes of this error are as follows.

1. Connections coming loose because of high movement within the motherboard.

2. Dry solder connections begin to crack under pressure from intense heat.

3. Your GPU can become infected by this heat due to the heat-sinks being made smaller.

Lets assume that you have very little or basic understanding of what this fantastic console holds electronically. Also that you want to know some information which can help you to fix Xbox 360 red ring of death yourself at home.

1. First of all you need to find where the GPU is located. So you need to firstly switch off all power and then proceed by opening up your console. Next you need to find the GPU and you will see this once you have taken away the DVD and hard disk drives in order to access the graphics processor unit.

2. You may have some loose connections in and around where the GPU is located. If so then you have a simple task of re-soldering these loose connections back together. If you have no loose connections then proceed by taking the heat- sink away from the GPU. Be extremely careful when doing this step because this is where all the heat is soaked up, so if you have been recently playing on your Xbox 360 then make-sure this heat-sink has had some cooling time.

3. Clean the GPU with some alcohol rubbing substance then re-apply the thermal paste onto the top of the GPU. You can buy this paste at any computer gadget or electronics store. Leave to set for a few minutes (10-20 minutes approximately) and when you are satisfied this paste has set you can re-attach the x-shaped clamp back on top which holds everything down evenly.

4. Re-assemble everything back together carefully. Re-connect your DVD and disk drives, place the console outer shell back on and proceed by switching the power back on. Hopefully this should work for you and is a good way of fixing the dreaded red rings of death for good.

Taking the Xbox 360 apart can be quite daunting for people who have spent several hundred dollars on a console. You could pay Microsoft $140 to have your Xbox 360 3 red lights fixed and then wait 6-8 weeks before you will even see it again. Or just Fix Xbox 360 red ring of death yourself in 1-2 hours and do it in a much cheaper way (AT HOME) by following step by step video tutorials which will fix any Xbox 360 error permanently by Clicking Here.

Article Source: http://EzineArticles.com/?expert=John_Reed_Smith

Who Else Wants to Fix Xbox 360 3 Red Lights? Fix Permanently Without Waiting 6-8 Weeks!

Fix xbox 360 Red Ring Of Death - Heat-Sink & Inner Workings Pic.

If you are looking for ways to fix Xbox 360 3 red lights then it is because your console is stating that there is a hardware error within the motherboard. More famously known as the Xbox 360 red ring of death, it is a common thought of other console owners that the only way to fix this error is to send it back to Microsoft. This method can be avoided as you can wait up to 6-8 weeks before seeing it again and will have to pay $140 to have it fixed.

In most cases this error is caused by an overheating issue which can infect the inner workings of the hardware system where all the major working components are situated. This is why so many people believe they have to send it back to Microsoft to be repaired. Yes you can do this, but reports have indicated that even when people have chosen this option they have still experienced the dreaded red rings of death soon after receiving a refurbished console.

The manufacturers will not tell you that they made a design error with the heat-sinks. These are supposed to take away any excess heat away from important parts of your console. These were down-sized in order to be able to fit in with the slim design of the console and as a result have caused so many issues with many other Xbox 360 owners. This heat causes the motherboard to vibrate during play which then combines heat with movement, which is not good for the major components within. Lead free solder joints can begin to crack under this heat combined with movement and this is where the Xbox ring of death will appear.

You can fix Xbox 360 3 red lights yourself by firstly turning off all power and then removing the outer plastic casing. You will then need to remove the fan along with the DVD device. Locate and remove the x-clamp which looks exactly as is stated. Loosen the heat-sinks and you will see the components CPU & GPU, these should be marked with their names. Clean the GPU and then proceed by applying some arctic silver compound to it. This replaces what is lost from months of overheating and allow this to set for up to 20 minutes. After waiting for 20 minutes you can re-assemble everything back together.

In some cases you will be required to do more or less than what is explained above. It all depends on the error itself and the individual but sometimes you will have to replace screws and washers which will require the use of tools.

Taking the Xbox 360 apart can be quite daunting for people who have spent several hundred dollars on a console. You could pay Microsoft $140 to have your Xbox 360 3 red lights fixed and then wait 6-8 weeks before you will even see it again. Or just Fix Xbox 360 red ring of death yourself in 1-2 hours and do it in a much cheaper way (AT HOME) by following step by step video tutorials which will fix any Xbox 360 error permanently by Clicking Here.

Article Source: http://EzineArticles.com/?expert=John_Reed_Smith

Discover How to Fix Xbox 360 3 Red Lights in Just 60 Minutes – Try These Tips Before Spending $140

Fix Xbox 360 Red Ring Of Death - Xbox 360 Famous Logo!

Have you almost given up on finding a solution to fix Xbox 360 3 red lights on your console? Well like so many other Xbox owners you have probably just been hoping this error would go away on its own. This is never going to happen because 3 red lights usually means you have encountered some kind of hardware failure within your system. If these warning signs are left alone without fixing properly then this could mean permanent damage to a console that has cost you $400 in the first place.

There are different errors you can encounter on the Xbox 360 which all have different meanings. You can find out about these meanings on the official Microsoft website or by typing the error name into a search engine. But with the red ring of death there is not a quick fix for it that will work permanently. You may have experienced freezing on your console and people believe they can just restart it and everything will be fine. But this is not going to work unfortunately and what is actually required is a little more technical than this method.

There are some methods you can try at home in order to fix Xbox 360 3 red lights for good and this allows you to avoid sending it back to Microsoft and being without it for several weeks. One method is to replace the x-shaped clamps which are found within the motherboard. Many reports from previous console owners have stated that these clamps are not evenly holding down the heat-sinks and other major components found at the motherboard. Once you have replaced these you need to add nylon washers to the heat-sinks at both top and bottom of the screws and fix back down. Then you need to ensure that everything is evenly placed back down and that there has not been any component damage caused due to overheating.

Have a good look around the system to see if there are any loose components. These can come loose due to extreme heat which is caused because of the heat-sinks being made smaller. This change of size was made because of the sleek design of the Xbox 360 console. Also it would be a good idea to clean any dust or grime away from your console that may have built up over time. Cleaning the GPU (graphics processor unit) that is positioned below the heat-sinks with alcohol rubbing substance can prevent form freezing issues in the future.

There are many ways to fix the Xbox ring of death and it all depends on how long the error has been allowed to go on without any maintenance. Or it could be down to general misuse or a design fault by Microsoft themselves.

Either way you can also try these 2 options if you decide not to risk taking your console apart yourself. You could pay Microsoft $140 to have your Xbox 360 3 red lights fixed and then wait 6-8 weeks before you will even see it again. Or just Fix Xbox 360 red ring of death yourself in 1-2 hours and do it in a much cheaper way (AT HOME) by following step by step video tutorials which will fix any Xbox 360 error permanently by Clicking Here.

Article Source: http://EzineArticles.com/?expert=John_Reed_Smith

Discover How to Fix Xbox 360 Red Ring Of Death – Permanent Repair in Under 2 Hours – Even on Old Consoles!

Fix Xbox 360 Red Ring Of Death - 1-2 Hour Fix Repair Guide Pic.

Are you tired of looking online trying to find ways to fix Xbox 360 red ring of death? Well you and thousands of others are doing exactly the same right now. This error is the most common of all and usually comes down to overheating within the Xbox 360 motherboard. Without proper cooling time allowed due to excessive play combined with a Microsoft heat-sink design fault, it is no wonder so many people are scrambling online to find a way to fix the Xbox ring of death.

Movement to the motherboard plus overheating causes components like the GPU to come loose from their soldering joints. These joints are soldered with lead free solder which can be more vulnerable to extreme heat. You are probably now wondering why you ever bought this console in the first place, but do not worry because there is a repair which you can try yourself at home in just under 2 hours right here.

Fix Xbox 360 red ring of death steps.

1. Take away the outer plastic casing from your console.
2. Disconnect the DVD drive and remove the metal casing.
3. Now disconnect the fan along with your consoles motherboard.
4. Find a clamp which is shaped like an x and remove carefully.
5. Under here you will see the heat-sink along with the GPU & CPU.
6. Use a alcohol rubbing substance to clean both the GPU & CPU until looking like brand new.
7. Buy some arctic silver compound from any electronic or computer repair store and use evenly over the GPU.
8. Do not do anything else until you have left this substance to set for around 15-20 minutes.
9. Next you need to put a couple of nylon based washers on top and below of the screws that are used for the heat-sinks. After this is done you can fix it back onto the motherboard.
10. Now you can put your console back to its original state and begin playing again.

This should only take you around 2 hours to do and is very achievable for anyone who has some kind of experience with fixing electronic gaming devices like the Xbox 360 before. This is a much cheaper way of fixing the Xbox 360 3 red lights and it will also save you a lot of time in the process.

Many people are not comfortable with taking their consoles apart without any visual or professional guidance. If you are this person then there are 2 options you can choose from. You could pay Microsoft $140 to have your Xbox 360 3 red lights fixed and then wait 6-8 weeks before you will even see it again. Or just Fix Xbox 360 red ring of death yourself in 1-2 hours and do it in a much cheaper way (AT HOME) by following step by step video tutorials which will fix any Xbox error permanently by Clicking Here.

Article Source: http://EzineArticles.com/?expert=John_Reed_Smith

Looking For Ways to Fix Xbox 360 Red Rings Of Death? Discover Several Permanent Solutions Here

Fix Xbox 360 Red Ring Of Death - 3 Red Lights Image Pic.

Since 2005 many Xbox 360 owners have been looking for ways to fix Xbox 360 red ring of death for good. Many of these consoles have suffered from a general hardware failure which has been caused by them overheating excessively. You will know when this error has infected your console because 3 red lights will be displayed on the front of your console and is also known as a e-74 error.

An error within the hardware system means that a quick fix solution is not going to help your console. New estimates show that 1/3 of all Xbox 360 consoles will face the problem of Xbox 360 3 red lights at some stage of their gaming lives.

Main causes for overheating.

This is a combination of the owner not allowing the console any cooling time whilst long hours of play, plus a design fault by Microsoft themselves. Within your motherboard system is where the heat-sinks are located and are not allowed to take away as much heat from the major components and processors as they should. Constant overheating combined with tightly packed components means any external heat escape from your console becomes even more difficult.

How can you repair these errors then.

It is very frustrating for you to get the Xbox 360 red lights after spending so much money on the console itself plus any additional costs of buying the games also. So it is very understandable that you would want to find a quick, cheap and permanent solution to fix Xbox 360 red ring of death.

You can send your console back to Microsoft to get the red rings repaired. This is of course free if your console is still within its warranty time frame. If not you will need to pay Microsoft $140 plus shipping and handling fees and then wait for up to 6-8 weeks before you even see it again. Plus reports from previous owners have stated that the error can come back again even after it has been sent back to Microsoft to be fixed.

Another alternative is to fix the error yourself at home. One suggestion is to replace the fan with a new one and another is to remove the x-shaped clamps which hold down the heat-sinks. Next you will need to place nylon washers onto the screws that connect the heat-sinks back to the motherboard. This will give your console some much needed breathing space within and will allow the heat-sinks to do a more effective job.

Try to avoid using the famous towel trick at all costs. This does actually work but will eventually cause further damage to your console. After using this method too many times it will just mean your console will become damaged beyond repair which can be a costly gamble to a $400 console.

Fixing the dreaded red rings yourself is very simple if you have technical skills and previous experience with fixing electronic devices. Paying Microsoft $140 + and having to wait 6-8 weeks is another option for you. Or just Fix Xbox 360 red ring of death yourself in 1-2 hours and do it in a much cheaper way (AT HOME) by following step by video tutorials which show you how to fix any error permanently by Clicking Here.

Article Source: http://EzineArticles.com/?expert=John_Reed_Smith